Site Safety Training archivos - ECI-Hub

EUSR – National Water Hygiene Training

admin — Tue, 02 Dec 2025 23:18:41 +0000

Site Safety Training

The “Blue Card”

EUSR – National Water Hygiene Training

Overview

The National Water Hygiene scheme is standard UK water industry certification programme to ensure the protection of public health and promoting safe drinking water practices. It is a criminal offence to supply water unfit for human consumption.

AMP8 will require more than twice the number of qualified personnel to deliver the outputs required by Water Companies. Make sure your workforce is certified.

Who is it for

Any person working on a clean water site or “Restricted Operations area” at sites such as; water pumping stations, service reservoirs, water treatment works, wells, springs and boreholes or working on the network of water mains and service pipes must be in possession of an in date National Water Hygiene card

When do the courses run?

The 90 Minute E-learning and can be attended at any time that suits you. It is approximately 60 minutes of e-learning and 30 minutes for revision and online assessment.

If you would like to request trainer led training please contact us here

Why EUSR National Water Training?

Learning Outcomes

The e-learning scheme consists of 10 modules covering awareness of safe water hygiene practices:

Module 1: Preventing contamination
Module 2: The importance of water
Module 3: Water Is Food
Module 4: Water as a carrier of disease
Module 5: Restricted Operations
Module 6: Potential causes and consequences of contamination: Water Treatment and Storage
Module 7: Potential causes and consequences of contamination: Water Network
Module 8: Preventing Contamination
Module 9: Disinfection
Module 10: Ensuring Quality: Sampling and Audit

Health Screening Requirement

The first part of the EUSR National Water Hygiene training includes a mandatory health pre-screening. This applies to anyone working in roles with potential contact with treated water – such as water networks, treatment works, or water sampling.

Candidates must pass both the health screening and the assessment to receive their EUSR card.

Assessment

This training is delivered through self paced e-learning. If you would like this training delivered in person at your site or offices please contact us.

e-Learning (with associated e-Assessment), is accessed via EUSR’s XAMS e-Learning portal. The exam usually takes 30 minutes and can be completed at the end of the course.

A health screening questionnaire must be completed by all individuals prior to the training and assessment. In this questionnaire, you must declare whether you have, or have had in the preceding 12 months, any of these illnesses:

Typhoid
Paratyphoid
Dysentery
Persistent diarrhoea or vomiting
Jaundice or Hepatitis (A or E)
Prolonged unexplained fever

What are the questions for the National Water Hygiene test?

We want to make sure you pass. You can request practice questions similar to those in the training.

Key Information

Duration: This course takes approximately 60 minutes of e-learning and 30 minutes for revision and online assessment.

E-learning: can be attended at any time that suits you.

Group Bookings: can be arranged in-person or as an E-classroom on request.

If you would like to request trainer led training please contact us here.

Certification: is usually issued with 48hours of completing the training but can be fast tracked if required and lasts for 3 years.

Pricing & Booking

Cost – £130.00 + VAT

“The E-learning is a great alternative to travelling to a classroom. We were able to sit the training while we waited for the weather to clear up. The team are very helpful, it was nice to be able to pick up the phone and speak to a real person – Thanks for your help Clio!”

Course Content

Related Courses

Benefits for Learners and Managers

Completing the Functional Safety Foundation course delivers the following benefits:

Improved safety culture: Personnel gain an appreciation of the role of functional safety in preventing accidents and reducing risk.
Regulatory compliance: Understanding IEC 61511 and related standards helps organisations meet legislative requirements and industry best practice.
Enhanced competence: The course forms part of the CompEx competency pathway, supporting future progression to more advanced modules.
Cross‑functional awareness: Both technical and non‑technical staff develop a shared language and understanding, improving collaboration across departments.
Cost‑effective training: With no prerequisites and flexible delivery options, FSF is an accessible introduction to functional safety for a broad audience.

Course Content

The FSF curriculum covers foundational concepts and real‑world examples to reinforce learning. Key topics include:

Functional safety principles – introduction to functional safety, safety integrity levels (SIL) and the role of SIS.
Standards and regulation – overview of IEC 61511 and IEC 61508, differences between sector‑specific standards and how they integrate with ATEX/DSEAR requirements.
Lifecycle phases – hazard and risk analysis, specification of SIFs, design and engineering, installation, validation, operation, maintenance and decommissioning.
Testing and proof concepts – types of proof testing, coverage and interpretation of test results.
Overrides, inhibits and management of change – safe management of overrides and inhibits, and the importance of robust procedures.
Assessments and audits – conducting functional safety assessments and audits to ensure compliance and continuous improvement.

Course Content

FAQs

Benefits for Learners and Managers

Completing the Functional Safety Foundation course delivers the following benefits:

Improved safety culture: Personnel gain an appreciation of the role of functional safety in preventing accidents and reducing risk.
Regulatory compliance: Understanding IEC 61511 and related standards helps organisations meet legislative requirements and industry best practice.
Enhanced competence: The course forms part of the CompEx competency pathway, supporting future progression to more advanced modules.
Cross‑functional awareness: Both technical and non‑technical staff develop a shared language and understanding, improving collaboration across departments.
Cost‑effective training: With no prerequisites and flexible delivery options, FSF is an accessible introduction to functional safety for a broad audience.

Course Content

The FSF curriculum covers foundational concepts and real‑world examples to reinforce learning. Key topics include:

Functional safety principles – introduction to functional safety, safety integrity levels (SIL) and the role of SIS.
Standards and regulation – overview of IEC 61511 and IEC 61508, differences between sector‑specific standards and how they integrate with ATEX/DSEAR requirements.
Lifecycle phases – hazard and risk analysis, specification of SIFs, design and engineering, installation, validation, operation, maintenance and decommissioning.
Testing and proof concepts – types of proof testing, coverage and interpretation of test results.
Overrides, inhibits and management of change – safe management of overrides and inhibits, and the importance of robust procedures.
Assessments and audits – conducting functional safety assessments and audits to ensure compliance and continuous improvement.

Course Outcomes

Understand IEC 61511 and related functional safety standards.
Describe functional safety lifecycle phases.
Recognise operation, maintenance, testing and audit requirements for safety instrumented functions.
Apply basic risk reduction strategies and appreciate the role of safety systems in hazardous industries.

Who Should Attend

Operators, maintenance technicians and supervisors
Process engineers, asset engineers and plant managers.
HSE advisors, project managers and other personnel requiring functional safety awareness.
Open to technical and non‑technical staff – no prerequisites.

Delivery & Pricing

Duration: Two‑day theory‑only course (8–10 hours guided learning).
Formats: In person at our Sunbury‑on‑Thames centre, live virtual classroom or on‑site delivery for groups.
Cost: Price on application; discounts available for group bookings.
Upcoming dates: Please contact us for the next available session.

Certification & Recognition

Awarded the CompEx Functional Safety Foundation Certificate on passing the exam.
Assessment via online multiple‑choice exam (30 questions, 45 minutes).
Certification demonstrates understanding of functional safety principles and supports progression within the CompEx competency pathway.

FAQs

General

What is the National Water Hygiene Scheme?

The scheme is designed to ensure that anyone working with water supply systems understands the importance of maintaining hygiene and preventing contamination. It is a key requirement for professionals in the water industry in the UK.

Who needs a National Water Hygiene Card?

The card is required for anyone involved in the drinking water supply chain, including water engineers, contractors, site workers, and inspectors.

Is this course suitable for individuals or only organizations?

Both! Whether you’re an individual looking to advance your career or an organization aiming to certify your staff, this course is designed for all participants.

Is prior experience in the water industry required to take this course?

No prior experience is necessary. The course is suitable for beginners as well as experienced professionals seeking certification or renewal.

Course Details

How long does it take to complete the course?

The course typically takes X hours to complete, but you can study at your own pace and access the materials whenever it suits you.

What topics are covered in the course?

The course covers:

The importance of water hygiene
Risks of water contamination
Standards and regulations in water operations
Best practices for maintaining safe drinking water systems

Are there any practical sessions included in the course?

As this is an e-learning course, the training is theoretical and includes interactive modules, videos, and quizzes to ensure understanding. Practical application will occur on-site during your work.

Will there be an assessment at the end of the course?

Yes, there is an online assessment at the end of the course to test your knowledge. You must pass this to receive your certification.

Certification

What do I get upon completing the course?

Upon successful completion, you will receive a National Water Hygiene Card (commonly known as the Blue Card), which is valid for 3 years.

How do I receive my National Water Hygiene Card?

Once you pass the assessment, your card will be processed and sent to your registered address within X days.

Can I renew my card through this course?

Yes, this course is suitable for those renewing their National Water Hygiene certification.

Is this certification recognized across the UK?

Yes, the National Water Hygiene Card is widely recognized and required for water industry professionals across the UK.

E-Learning Platform

What technology do I need to access the course?

You only need an internet connection and a device like a computer, tablet, or smartphone. The course platform is accessible from all modern browsers.

Can I pause and resume the course?

Absolutely! The course is self-paced, so you can stop and resume your training at any time.

What if I have technical issues while taking the course?

Our support team is available to assist you with any technical difficulties. Simply contact us via [email/contact form].

Can multiple people from my organization take the course simultaneously?

Yes, we offer options for group registrations with potential discounts for bulk enrollments.

La entrada EUSR – National Water Hygiene Training se publicó primero en ECI-Hub.

Thames Water Safety Passport – Training

admin — Tue, 02 Dec 2025 22:21:16 +0000

Site Safety Training

Thames Water Safety Passport – Training

The “Blue Card”

Overview

The Thames Water Safety Passport is a mandatory safety qualification for anyone who needs access to Thames Water operational sites.

This training prepares employees, contractors, and supply-chain partners to work safely within Thames Water environments by covering essential site hazards, environmental responsibilities, and behavioural expectations.

As a result, organisations can demonstrate compliance with Essential Standard 9 (Thames Water Safety Passport Training Requirements) and maintain accurate competency records within SkillGuard for Utilities.

Once delegates successfully complete the course, their certification is recorded in SkillGuard and becomes visible to site access systems before attending operational locations.

This course forms part of Thames Water’s competency framework under Thames Water’s Zero Compromise standards.

Who Should Attend

The Thames Water Safety Passport course is required for anyone who regularly accesses Thames Water operational facilities.

Typical attendees include:

Thames Water employees and approved contractors
Capital delivery and supply-chain partners
Supervisors, engineers, and project managers
MEICA, maintenance, and network teams
Civils and repair teams working on operational assets
Visitors who require routine site access

Before attending the course, delegates must hold an active SkillGuard number issued by their employer.

Learning Outcomes

By the end of the course, participants will be able to:

Explain Thames Water’s Zero Compromise safety culture
Identify hazards associated with water and wastewater facilities
Apply safe systems of work and follow operational site rules
Recognise environmental responsibilities and pollution-prevention controls
Respond appropriately to emergency situations and incident reporting procedures
Maintain training records and competency status within SkillGuard

Assessment & Certification

Learners complete a short assessment to confirm understanding of safety and environmental requirements. Upon successful completion:

The Safety Passport competency is uploaded into SkillGuard for Utilities
Certification is valid for three years, in line with Essential Standard 9

Note: SkillGuard card expiry and competency expiry may differ. Employers are responsible for ensuring both remain current.

Key Info

Duration & Delivery

Duration: Half-day
Delivery: Live online (Teams/Zoom)
On-site delivery: Available for group bookings upon request

Pricing & Booking

£75 + VAT per person
Group and on-site delivery: Price on Application (P.O.A.)

“Jon Wallis brings health and safety on Thames Water sites to life. Engaging and insightful. Involving everyone on the call to engage, add their thoughts. I observed an obvious shift in perception from people on the course from the start to the finish and this is testament to the delivery and content and personality Jon brings to the course. Would highly recommend this course. “

Key Information

Service: Thames Water Safety Passport
Requirement: Mandatory for TW operational site access (ES-9)
Format: Live online
Duration: Half-day
Cost: £75 + VAT
System: Recorded in SkillGuard for Utilities
Validity: 3 years
Prerequisites: Active SkillGuard number (issued by employer)
On-site training: Available for groups

Why the Thames Water Safety Passport Matters

Working on live water and wastewater infrastructure introduces a range of operational risks. Therefore, Thames Water requires a consistent safety standard for everyone entering its sites.

This training ensures that personnel:

Recognise hazards associated with water and wastewater operations
Follow Thames Water’s Zero Compromise safety culture
Apply safe systems of work and site rules
Protect the environment through responsible operational behaviour

Consequently, organisations strengthen both safety performance and compliance across their projects.

Course Content

The course covers the core safety and environmental topics required for Thames Water site access:

Thames Water’s safety principles and leadership expectations
Roles, responsibilities and communication standards on operational sites
Hazards, risks and control measures for clean and wastewater environments
Environmental protection, waste management and pollution-prevention obligations
Local rules, inductions and site-specific behaviours
Emergency procedures, incident reporting and escalation
Using SkillGuard to record competencies and verify authority to work

Course Content

FAQs

Benefits for Learners and Managers

Completing the Functional Safety Foundation course delivers the following benefits:

Improved safety culture: Personnel gain an appreciation of the role of functional safety in preventing accidents and reducing risk.
Regulatory compliance: Understanding IEC 61511 and related standards helps organisations meet legislative requirements and industry best practice.
Enhanced competence: The course forms part of the CompEx competency pathway, supporting future progression to more advanced modules.
Cross‑functional awareness: Both technical and non‑technical staff develop a shared language and understanding, improving collaboration across departments.
Cost‑effective training: With no prerequisites and flexible delivery options, FSF is an accessible introduction to functional safety for a broad audience.

Course Content

The FSF curriculum covers foundational concepts and real‑world examples to reinforce learning. Key topics include:

Functional safety principles – introduction to functional safety, safety integrity levels (SIL) and the role of SIS.
Standards and regulation – overview of IEC 61511 and IEC 61508, differences between sector‑specific standards and how they integrate with ATEX/DSEAR requirements.
Lifecycle phases – hazard and risk analysis, specification of SIFs, design and engineering, installation, validation, operation, maintenance and decommissioning.
Testing and proof concepts – types of proof testing, coverage and interpretation of test results.
Overrides, inhibits and management of change – safe management of overrides and inhibits, and the importance of robust procedures.
Assessments and audits – conducting functional safety assessments and audits to ensure compliance and continuous improvement.

Course Outcomes

Understand Thames Water safety expectations and behaviours
Recognise hazards and apply safe systems of work
Demonstrate pollution-prevention and environmental awareness
Follow emergency and reporting procedures
Maintain valid training status in SkillGuard

Who Should Attend

Thames Water employees and contractors
Supervisors, engineers, operatives and project teams
Supply-chain partners and MEICA/civils contractors

Delivery & Pricing

Half-day online training
£75 + VAT per person
Group/on-site delivery P.O.A.

Certification & Recognition

Certification recorded in SkillGuard
Valid for 3 years
Required for Thames Water site access (ES-9)

FAQs

Is this an EUSR qualification?

No. This is a Thames Water-specific training requirement recorded in SkillGuard, not EUSR.

Do I also need a National Water Hygiene (Blue Card)?

If your work involves clean water networks or restricted operations, a valid EUSR Blue Card is also required.

Do I need a SkillGuard number before training?

Yes. Employers must register the delegate in SkillGuard before attending.

How long is the Passport valid?

Certification is valid for three years.

Can this training be delivered on-site?

Yes. On-site delivery can be arranged for groups and tailored to operational needs.

Related Courses

La entrada Thames Water Safety Passport – Training se publicó primero en ECI-Hub.

CAT & Genny – Cable Avoidance Training

admin — Tue, 02 Dec 2025 22:04:30 +0000

Site Safety Training

CAT & Genny – Cable Avoidance Training

Overview

The CAT & Genny Training Course provides the essential knowledge and practical skills needed to safely locate underground services before excavation. Designed for operatives, supervisors and contractors, this training ensures compliance with safe-digging practices and reduces the risk of strikes to buried electric, gas, water, telecom and fibre networks.

Underground service strikes remain one of the most common—and costly—causes of injury, service interruption and project delays. This course equips learners to use Cable Avoidance Tools (CAT) and Signal Generators (Genny)correctly, interpret signal responses and apply safe-digging techniques aligned to industry best practice and HSG47.

Who Should Attend

This course is suitable for anyone involved in excavation or utility location work, including:

Groundworkers, civils and construction operatives
Utility, drainage and reinstatement teams
Supervisors, inspectors and permit-to-dig approvers
Contractors performing excavation or survey works near underground services
New operatives requiring initial training or experienced workers needing refresher training

No prior experience is required.

Learning Outcomes

By the end of this course, participants will be able to:

Understand the types of underground utilities and the risks associated with them
Operate CAT and Genny equipment safely and confidently
Apply scanning techniques for Power, Radio, and Genny modes
Identify limitations of detection equipment and common user errors
Interpret signal responses and pinpoint utility locations accurately
Follow safe-digging procedures in line with HSG47 and industry guidance
Reduce the risk of service strikes and excavation incidents

Assessment & Certification

Learners complete a short practical and/or written assessment to confirm competence. Successful participants receive a Certificate of Competence in CAT & Genny Use.

Certification is valid for three years, or sooner if site rules or client requirements specify refresher training.

Cost

Duration & Delivery

Duration: Half-day or full-day (depending on client requirement)
Format: On-site practical training or blended classroom + field practice
Equipment: All CAT and Genny devices provided if required

Pricing & Booking

Price: £POA depending on group size and location
On-site delivery: Available nationwide
Bespoke sessions: Can be tailored to site procedures or permit-to-dig processes

Key Information

Service: CAT & Genny Competency Training
Format: On-site, practical and instructor-led
Duration: Half or full day
Cost: £POA
Certification: Competence certificate valid for 3 years
Standards: Aligned to HSG47 “Avoiding Danger from Underground Services”
Audience: Operatives, supervisors and contractors involved in excavation

Course Content

The course includes:

Overview of underground services and common service-strike hazards
Understanding CAT operating modes (Power, Radio, Genny)
Using a Signal Generator (Genny) effectively
Locating metallic and non-metallic services
Depth and trace assessments (where applicable)
Limitations of detection equipment
Safe-digging techniques and best practice from HSG47
Hands-on practice with supervised scanning exercises
Real-world examples of service strikes and how to prevent them

Course Outcomes

Locate underground services safely and accurately
Operate CAT & Genny equipment with confidence
Apply safe-digging practices and reduce service-strike risks
Follow HSG47 guidance and client-specific procedures

Who Should Attend

Civils, groundworks and excavation teams
Utility and reinstatement operatives
Supervisors and permit-to-dig approvers
Contractors working near live underground services

Delivery & Pricing

On-site, practical training
Half-day or full-day format
Pricing based on group size and location

Certification & Recognition

Certificate of Competence in CAT & Genny Use
Valid for 3 years
Recognised across construction, utilities and infrastructure sectors

FAQs

Is this course accredited?

This course provides a recognised Certificate of Competence and meets industry expectations for CAT & Genny skills training.

Do I need previous experience?

No. This course is suitable for new and experienced operatives.

Can you deliver training on our site?

Yes. On-site delivery is available and recommended for practical relevance.

Do learners need to bring equipment?

No. We can provide CAT and Genny units, or we can train using your site equipment.

How long is the certificate valid for?

Certificates are typically valid for three years, depending on client or site requirements.

Secure your place on one of our upcoming CompEx courses

Book Now

Course Content

Related Courses

La entrada CAT & Genny – Cable Avoidance Training se publicó primero en ECI-Hub.

Managing Ageing Asset Risk – Integrity Training

admin — Mon, 24 Nov 2025 19:01:48 +0000

Site Safety Training

Managing Ageing Asset Risk – Integrity Training

The “Blue Card”

Overview

Industrial assets often continue to operate long beyond their original design life. As equipment and infrastructure age, the likelihood of degradation, failures and compliance issues increases. Managing Ageing Asset Risk is a one‑day training programme that equips duty holders, plant managers and technical teams with a structured approach to identifying, assessing and mitigating the risks associated with ageing assets.

Through interactive sessions, case studies and practical applications, participants learn how to align asset management strategies with current legislation and industry standards, apply risk‑based decision making and develop action plans that preserve asset integrity and ensure continued safe operation.

Who Should Attend

This course is designed for professionals responsible for asset integrity, maintenance and risk management in industries where ageing assets present operational challenges. Typical attendees include:

Duty holders and plant managers who oversee asset operations and regulatory compliance.
Maintenance and reliability engineers tasked with inspecting, maintaining and repairing ageing equipment.
Operations and facilities managers responsible for day‑to‑day performance and safety.
Technical authorities and subject matter experts who advise on asset integrity and lifecycle planning.
Engineering and project teams involved in upgrades, modifications and decommissioning.
Operations and Maintenance Teams responsible for planned and reactive maintenance on site .

No formal prerequisites are required; however, a working knowledge of asset operations and maintenance practices is beneficial.

Learning Outcomes

By the end of this course, participants will be able to:

Identify key terms, legislation and standards relevant to ageing asset management and recognise how regulatory frameworks such as COMAH and PUWER influence asset integrity strategies.
Define common risks and deterioration mechanisms associated with ageing assets and explain how corrosion, fatigue, obsolescence and other failure modes impact performance and safety.
Describe best practices for managing ageing assets, including maintenance strategies (predictive and preventive), lifecycle planning and condition monitoring techniques.
Identify principles of leadership and change management to support cultural and organisational shifts required for sustainable asset integrity programmes.
Categorise and prioritise risks using risk matrices and criticality assessments, and develop risk‑based decision processes.
Develop and implement action plans to mitigate ageing‑related risks, allocate resources and ensure long‑term asset performance.

Assessment & Certification

This course does not include a formal examination. However, participants complete group exercises, case studies and practical applications throughout the day to reinforce learning. Delegates who attend the full session receive a certificate of completion, demonstrating they have gained the knowledge necessary to manage ageing asset risks effectively.

Key Info

Duration & Delivery

Duration: One‑day course (customisable to suit site‑specific requirements).
Format: Interactive sessions combining theory, case studies and practical applications.
Location: Delivered in‑house at your facility or virtually via a secure online platform.
Customisation: Course content can be tailored to your asset portfolio, industry sector and regulatory context. Please contact us to discuss bespoke requirements.

Pricing & Booking

Pricing for this course is available on application (P.O.A.) and depends on factors such as delivery format, attendee numbers and customisation needs. The fee covers all training materials and certificates of completion.

Benefits for Learners and Managers

Increased asset integrity: Participants learn to identify deterioration mechanisms early and implement appropriate maintenance strategies, reducing unplanned downtime and extending asset life.
Regulatory compliance: The course aligns asset management practices with current legislation and standards, helping organisations maintain compliance and prepare for audits.
Risk‑based resource allocation: Delegates gain tools for prioritising maintenance and capital investment based on risk and criticality, ensuring funds are directed where they offer the greatest benefit.
Leadership development: Managers and technical authorities learn how to drive cultural change and foster a proactive approach to ageing asset management across their teams.
Customised relevance: In‑house delivery ensures the training addresses specific assets, systems and challenges, while virtual sessions provide flexible access for dispersed teams.

Course Content

Introduction to Ageing Asset Management

Definitions, key concepts and terminology.
Overview of relevant legislation and standards applicable to ageing assets.
Asset types, categories and key risk factors.

Identifying and Managing Ageing Asset Risks

Understanding deterioration mechanisms and common failures (corrosion, fatigue, obsolescence, wear).
Assessing criticality and associated risks through qualitative and quantitative techniques.
Establishing and monitoring performance indicators for asset condition and integrity.

Developing an Effective Asset Management Approach

Leadership and strategic alignment in asset management.
Managing organisational and technical change during asset upgrades or life‑extension projects.
Effective data acquisition, condition monitoring and inspection planning.
Action management, continuous improvement and the role of feedback loops.

Risk‑Based Decision Making

Prioritisation of maintenance and investment based on risk exposure and criticality.
Implementing an effective action management system to track mitigation measures and ensure accountability.

Course Content

More Information

Course Outcomes

Recognise legislation and standards for ageing asset management.
Understand common degradation mechanisms and failure modes.
Apply best practices in maintenance and lifecycle planning.
Implement risk categorisation, prioritisation and action plans.
Support leadership and change management initiatives for asset integrity.

Who Should Attend

Duty holders, plant managers and facilities managers.
Maintenance and reliability engineers.
Technical authorities, project teams and operations staff.
Those involved in asset integrity, maintenance planning and risk management.

Delivery & Pricing

Duration: One‑day (customizable to suit your plant and assets).
Formats: In‑house at your site or live virtual delivery.
Cost: Price on application (contact us for a quote).
Certification: Certificate of completion issued upon full attendance.

Certification & Recognition

Certificate of completion demonstrating attendance and competency in ageing asset risk management.
Supports professional d\evelopment and may contribute to CPD requirements.
Evidence of proactive risk management for audits and regulatory inspections.

FAQs

What is managing ageing asset risk?

It is the systematic process of identifying, assessing and mitigating the risks associated with assets operating beyond their design life. The goal is to maintain safety, regulatory compliance and operational efficiency as equipment and infrastructure age.Who should attend this course?

Who should attend this course?

Duty holders, plant managers, maintenance and reliability engineers, operations managers, technical authorities and project teams involved in asset integrity, maintenance planning and risk management. Anyone responsible for managing ageing equipment will benefit.

Does the course include an exam?

No. Learning is reinforced through interactive activities and case studies rather than a formal examination. Delegates receive a certificate of completion upon finishing the course.

Can the training be tailored to our assets?

Yes. We offer customised in‑house sessions tailored to your asset portfolio, industry sector and regulatory context. Contact us to discuss bespoke content and scheduling.

How do I book and what does it cost?

Pricing is available on application. Please enquire now for further information.

Course Content

Related Courses

La entrada Managing Ageing Asset Risk – Integrity Training se publicó primero en ECI-Hub.

Bespoke Training & Learning – Customised for You

admin — Mon, 24 Nov 2025 18:16:20 +0000

Site Safety Training

Bespoke Training & Learning – Customised for You

The “Blue Card”

Overview

High-hazard environments demand training that reflects real plant conditions, real risks and real operational behaviours. Standardised courses often fail to capture site-specific hazards, systems and terminology – which is why many operators turn to tailored programmes that accurately reflect their facilities.

Our team designs and delivers customised, technically accurate, and regulatory-aligned training solutions for high-hazard process industries. Whether you need immersive inductions, bespoke learning pathways, 3D-modelled plant walkthroughs, VR/digital-twin simulations or full competency frameworks, our training is built around your site, your people and your regulatory requirements.

Who is it for?

Custom programmes are ideal for organisations requiring site-specific or risk-specific learning, including:

COMAH and high-hazard operators
Process safety, engineering, and maintenance teams
L&D managers and competency-assurance leads
Contracting companies requiring tailored onboarding
Asset integrity, functional safety and operational teams

These programmes support organisations that need training aligned to:

DSEAR/Hazardous Area Classification findings
Functional safety lifecycle responsibilities
Ageing asset management processes
Site induction and contractor-control requirements
Audit, regulatory or insurer expectations

Learning Outcomes

Outcomes vary by programme, but typically include the ability to:

Apply site-specific procedures, standards and hazard controls
Recognise operational risks unique to your facility
Demonstrate required competencies for regulatory assurance
Understand and perform tasks safely in line with engineered safeguards
Meet internal and external audit requirements

Why it matters

Bespoke training strengthens:

Safety performance: Site-specific hazards get site-specific controls
Competency and behaviour: Staff learn in realistic, relevant contexts
Compliance: Content aligns with DSEAR, ATEX, COMAH, IEC, and insurer requirements
Operational effectiveness: Training supports consistency across teams and contractors
Audit readiness: Programmes are built with traceability, defensibility and evidence in mind

Key Info

Delivery & Implementation

We offer flexible delivery options tailored to your organisation:

VR/digital-twin immersive sessions
Self-paced e-learning modules
Instructor-led virtual classrooms
On-site workshops and inductions
Blended programmes combining all formats

Training is supported with:

Competency assessments
Knowledge checks and refresher cycles
Integration into existing LMS or training systems
Ongoing content maintenance to match operational changes

Benefits

Training that reflects your site, not generic scenarios
High-engagement formats (VR, 3D models, video, interactive modules)
Clear performance and competency metrics
Alignment with internal procedures and regulatory frameworks
Supports induction, upskilling and continuous-improvement programmes

Pricing & Booking

Delivery ranges from single-topic modules to multi-week blended programmes.
Pricing depends on customisation level, number of learners, media format (video/VR/e-learning), and LMS integration.

Key Information

Service: Custom Training & Learning Solutions
Focus: Site-specific, risk-based and immersive training design
Formats: On-site, virtual, LMS e-learning, VR/digital twin, video modules
Customisation: Based on your hazards, terminology, processes and assessments
Common Use Cases: Site induction, contractor onboarding, DSEAR/HAC training, FS training, ageing-asset programmes
Organisation Types: COMAH operators, utilities, energy, manufacturing, engineering and supply-chain partners

Who We Work With

High-hazard and COMAH operators
Engineering, maintenance and operations teams
Asset integrity and functional safety teams
Contractor management and onboarding teams
L&D managers seeking scalable site-specific training

Typical Training Themes

DSEAR & Hazardous Area training
Functional Safety (IEC 61511)
Managing Ageing Assets
Asset-management and maintenance competence
Operational performance and safe systems of work
Immersive site inductions and contractor passports

Course Content

FAQs

Course Outcomes

Understand relevant regulations, directives and standards (ATEX, DSEAR, IEC 60079).
Recognise hazardous atmospheres and zone classifications.
Explain protection concepts, categories and EPLs for equipment.
Identify ignition sources and apply safe systems of work.
Interpret equipment marking and IP ratings.
Understand personal responsibilities and when to seek specialist advice.

Who Should Attend

Technicians, engineers and maintenance staff entering hazardous areas.
Project managers, procurement teams and supervisors involved in hazardous area projects.
Lab technicians, apprentices, scaffolders, cleaners and contractors.
Safety representatives and operational support staff.
Open to technical and non‑technical personnel – no prerequisites.

Delivery & Pricing

Duration: Two‑day, theory‑only course (6–10 hours guided learning).
Formats: Live online, in person at our Sunbury‑on‑Thames centre or on‑site delivery tailored to your facility.
Cost: £450 + VAT per person including exam and certificate.
On‑site pricing: P.O.A. for group bookings and bespoke delivery.
Upcoming dates: 19–20 Nov 2025, 19–20 Feb 2026, 21–22 May 2026.

Certification & Recognition

Receive the CompEx Certificate for Foundation in Hazardous Awareness (valid for five years) upon passing the exam.
Assessment via 30‑question online multiple‑choice exam (45 minutes, 70 % pass mark).
Internationally recognised qualification supporting your personal competence matrix and demonstrating compliance with ATEX and DSEAR.

FAQs

How do we know whether we need a bespoke training programme rather than an off-the-shelf course?

Bespoke training is recommended when your site has specific hazards, terminology, equipment, or operational procedures that generic modules cannot accurately reflect. Organisations typically choose custom programmes when they have recent DSEAR/HAC findings, functional safety responsibilities, contractor-control requirements, or unique plant/asset configurations that require precise alignment with real site conditions.

What information do you need from us to begin the design process?

We initially request core documentation such as site induction material, P&IDs, risk assessments (e.g., DSEAR/HAC), functional safety or ageing asset reviews, operational procedures, and competence requirements. This supports a structured Training Needs Analysis and ensures the final programme is technically accurate and aligned with your regulatory environment.

Can your training be integrated into our existing LMS or digital platforms?

Yes. All digital material — e-learning, video, animation, assessments, or VR - can be packaged to your LMS specifications (SCORM, xAPI, MP4, HTML5, etc.). We can also advise on LMS setup, user tracking, competency frameworks, and integration with contractor-management systems.

How long does a custom training project typically take?

Timelines depend on scope and media format.
Typical ranges:

Digital learning or video modules: 2–6 weeks
VR/digital-twin experiences: 6–12+ weeks
Full blended programmes: 4–12 weeks
We provide a detailed delivery plan after the discovery and scoping stage.

How do you ensure the training is compliant and technically accurate?

All content is developed by engineers and subject matter specialists with experience in DSEAR, ATEX, IEC 60079, IEC 61511, ageing asset management, and COMAH operations. Training is aligned with your documented hazards, site procedures and regulatory requirements.
We also validate training content with your in-house SMEs to ensure correctness and operational relevance.

Related Courses

La entrada Bespoke Training & Learning – Customised for You se publicó primero en ECI-Hub.